YOUR SOURCE FOR A FULL LINE OF FIREFIGHTING/RESCUE EQUIPMENT, APPARATUS, AND SERVICE

APPARATUS & EQUIPMENT SERVICE

As you are well aware, fire apparatus and equipment requires upkeep and maintenance to assure it is in front-line, work-ready condition, at a moment’s notice.  As a full-line provider of fire and rescue equipment, Hoosier Fire Equipment, Inc. has always lived by the mantra, “We Service, What We Sell!” While the phrase may be old and cliched, we back it up with a serious investment in our factory trained and “real world” experienced personnel, two (2) fully equipped Mobile Service Units, and an in-house service center at both our Valparaiso (Main Office) and Indianapolis (Mid-State) facilities.

JUST SOME OF THE SERVICES WE OFFER

TRUCK CHASSIS SERVICE

Fire trucks are becoming very complicated beasts with the advent of computerized pump controls, EPA regulations, multiplexing of the electrical system, and new collision safety features as just a few examples. At Hoosier Fire Equipment, we understand the interface of the “truck” and the “fire fighting” parts of the apparatus.  We also endeavor to stay on top of the latest manufacturers’ recommendations for regular maintenance intervals and lubrication specifications.  We appreciate the fact that this is not just another “truck”  in for a “lube job”.  For these reasons, we have expanded into the “truck” portion of the scheduled maintenance requirements.  To further support and enhance the regular scheduled maintenance of the entire apparatus, we are now also capable of a great deal of repair work to the various chassis components.  In fact, we can even do air conditioning work at the Mid-State shop.

PUMP PREVENTATIVE MAINTENANCE

At the heart of all fire departments is the pumper fire apparatus.  Will the pump perform as expected on the next fire?  Our pump preventative maintenance service is based on the recommendations of the major pump manufacturers.  All valves, including the drains, are checked for proper operation.  Pump transmission oil is changed and drive systems lubricated.  Packing is adjusted as necessary, and a vacuum test is performed.  A written report of the inspection and service is provided upon completion.

ANNUAL PUMP TEST

What kind of shape is the heart of the department in?  Will it deliver the big water needed at the next extraordinary fire?  An annual pump test is the stress test for the heart of the department, and is also worth points on the ISO rating.  Pump testing, along with our chassis and pump PM programs will give you reasonable assurance that the “heart” will perform at its best, when you need it the most.

CONVERSIONS/UPGRADES/
ACCESSORY INSTALLATION

Need an extra shelf in a compartment?  Maybe a new electrical cord reel would make that rescue last night a little faster.  How about relieving the load on your electrical system with some new LED lights?  We have an excellent fabricator on staff for any custom made sheet metal work that you may require.  We can also do up-fitting conversions for command vehicles, paramedic units, and custom wild land fire fighting vehicles.

SCOTT® S.C.B.A. TESTING AND REPAIR

OSHA and NFPA required annual flow testing can be performed in our shops or at your fire station by our Scott® Heath & Safety certified technicians.  A large inventory of spare parts is maintained for most  common repairs.

BREATHING AIR COMPRESSOR SERVICE

While specialized in Scott® Breathing Air Systems, our trained technicians are capable of servicing most major brands of high pressure breathing air compressors.  NFPA required air sample testing, periodic maintenance, and most repairs can be accomplished at your facility.

AMKUS® RESCUE TOOL MAINTENANCE

In the haste of attempting to free unfortunate victims from entrapment, rescue tools may be abused or asked to do more than the intended purpose.  To protect your investment and guarantee “run ready” performance, it is recommended that your Amkus® rescue system be thoroughly inspected and serviced annually.   Our  Amkus® certified technicians are available to perform complete system maintenance at your facility.

CYLINDER HYDRO-TESTING

Are your SCBA, SCUBA, or cascade cylinders due for a 3 or 5 year hydro-test?  Our Valparaiso shop is a certified D.O.T. cylinder hydro-test facility.  Give us a call and let us help you make arrangements to have your cylinder inventory hydro-tested and inspected, with minimal disruption to your operations.

CLICK HERE TO DOWNLOAD OUR EQUIPMENT SERVICE & MAINTENANCE PROGRAM BROCHURE

AUTHORIZED SERVICE CENTER FOR: